Journal Publications:
C M Haynes, M D Todd, E B Flynn, and A J Croxford, “Statistically-Based Damage Detection in Geometrically-Complex Structures Using Ultrasonic Interrogation, Structural Health Monitoring, 12(2), 141-152, 2013
S G Taylor, G Park, K M Farinholt, and M D Todd, “Fatigue Crack Detection Performance Comparison in a Composite Wind Turbine Rotor Blade,” Structural Health Monitoring 12(3), 252-262, 2013
M D Todd, C J Stull, and M Dickerson, “A Local Material Basis Solution Approach to Reconstructing the Three-Dimensional Displacement of Rod-Like Structures from Strain Measurements,” ASME Journal of Applied Mechanics, 80(4), 041028(1-10), 2013
S G Taylor, G Park, K Farinholt, and M D Todd, “Diagnostics for Piezoceramic Transducers Under Cyclic Loads,” Smart Materials and Structures, 22(1), 025024(1-11), 2013
Z Mao and M D Todd, “Optimal Structural Health Monitoring Feature Selection Via Minimum Performance Uncertainty,” Key Engineering Materials, 558, 235-243, 2013
C Haynes, T Nadabe, N Takeda, and M D Todd, “Scattering Matrix Approach to Informing Damage Monitoring and Prognosis in Composite Bolted Connections,” Key Engineering Materials, 558, 314-322, 2013
S Taylor, K Farinholt, G Park, C R Farrar, M D Todd, and J R Lee, “Structural Health Monitoring of Research-Scale Wind Turbine Blades,” Key Engineering Materials, 558, 364-373, 2013
Z Mao and M D Todd, “Statistical Modeling of Frequency Response Function Estimation for Uncertainty Quantification” Mechanical Systems and Signal Processing, 38, 333-345, 2013
G Jarmer, E Flynn, and M D Todd, “Dispersion Curve Estimation via Phased Array Beamforming Methods,” Journal of Intelligent Material Systems and Structures, 2013 (in press)
C. M. Haynes, T. Nadabe, N. Takeda, and M. D. Todd, “Monitoring of Bearing Failure in Composite Bolted Connections Using Ultrasonic Guided Waves: A Parametric Study,” Structural Health Monitoring, 2013.(in press)
G. Jarmer, E. Flynn, and M. D. Todd, “Multi-wave-mode, Multi-Frequency Detectors for Guided Wave Interrogation of Plate Structures,” Structural Health Monitoring, 2013 (in press)
S. G. Taylor, K. M. Farinholt, G. Park, C. R. Farrar, M. D. Todd, and J.-R. Lee, “Incipient Crack Detection in Composite Wind Turbine Blades,” *Journal of Intelligent Material Systems and Structures*, 2013 (in press)
Conference Proceedings:
D Y Harvey and M D Todd, “Automated Selection of Damage Detection Features by Genetic Programming,” Proceedings of IMAC XXXI: A Conference on Structural Dynamics, Garden Grove, California, February 11-14, 2013
Z Mao and M D Todd, “A Bayesian Framework of Transmissibility Model Selection and Updating,” Proceedings of IMAC XXXI: A Conference on Structural Dynamics, Garden Grove, California, February 11-14, 2013
S Torkamani, E A Butcher, and M D Todd, “Real-Time Damage Identification in Nonlinear Smart Structures Using Hyperchaotic Excitation and Stochastic Estimation,” Proceedings of IMAC XXXI: A Conference on Structural Dynamics, Garden Grove, California, February 11-14, 2013
M D Todd, D Y Harvey, D Gregg, B Fladung, P Blelloch, and K Napolitano, “Structural System Testing and Model Correlation”: An Industry-University Collaborative Course in Structural Dynamics,” Proceedings of IMAC XXXI: A Conference on Structural Dynamics, Garden Grove, California, February 11-14, 2013
S G Taylor, G Khoury, M D Todd, and D C Zimmerman, “Finite element-based damage detection using expanded Ritz vector residuals,” Proceedings of IMAC XXXI: A Conference on Structural Dynamics, Garden Grove, California, February 11-14, 2013
S G Taylor, D J Luscher, and M D Todd, State estimate of wind turbine blades using geometrically exact beam theory,” Proceedings of IMAC XXXI: A Conference on Structural Dynamics, Garden Grove, California, February 11-14, 2013
M D Todd, C J Stull, and M Dickerson, “A Locally-Exact Strain-to-Displacement Approach for Shape Reconstruction of Slender Objects Using Fiber Bragg Gratings,” Proc SPIE/Smart Structures NDE, San Diego, California, March 11-15, 2013 (invited paper)
D Y Harvey and M D Todd, “Automated Extraction of Damage Features Through Genetic Programming,” Proc SPIE/Smart Structures NDE, San Diego, California, March 11-15, 2013
S A Ouellette and M D Todd, “Uncertainty Quantification of a Corrosion-Enabled Energy Harvester for Low-Power Sensing Applications,” Proc SPIE/Smart Structures NDE, San Diego, California, March 11-15, 2013
C M Haynes and M D Todd, “Uncertainty Quantification of a Guided Wave Structural Health Monitoring System for Composite Bolted Joints,” Proc SPIE/Smart Structures NDE, San Diego, California, March 11-15, 2013
Z Mao and M D Todd, “Frequency Response Feature Selection in a Bayesian Framework,” Proc SPIE/Smart Structures NDE, San Diego, California, March 11-15, 2013
G Liu, Z Mao, and M D Todd, “Damage Detection Using Vector Autoregressive Models,” Proc SPIE/Smart Structures NDE, San Diego, California, March 11-15, 2013
G Jarmer, E Flynn, M D Todd, and J R Lee, “Enhanced Structural Damage Detection through Estimation and Isolation of Ultrasonic Guided Wave Modes using a Phased Transducer Array,” 15th Asia-Pacific Vibration Conference, Jeju Island, Korea, June 3-5, 2013
Z Mao and M D Todd, “Uncertainty Modeling and Quantification for Structural Health Monitoring Features Derived from Frequency Response Estimation,” DAMAS 2013: 10th International Conference on Damage Assessment of Structures, Dublin, Ireland, July 8-11, 2013
M D Todd, E Flynn, G Jarmer, and C Haynes, “Uncertainty Quantification in Ultrasonic Guided Wave Interrogation Using Detection Theory,” IEEE International Ultrasonics Symposium, Prague, Czech Republic, July 21-25, 2013 (invited keynote speaker)
M D Todd, C J Stull, and M Dickerson, “A Method for Reconstructing the Shape of Highly Flexible, Slender Objects from Distributed Strain Measurements,” SEMC 2013: The Fifth International Conference On Structural Engineering, Mechanics And Computation, Cape Town, South Africa, September 2-4, 2013
R Do and M D Todd, “Efficient Detection Methods on a Composite Plate with Interior Embedded Fiber Optic Sensors via Impact Test”, 9th International Workshop on Structural Health Monitoring, Stanford, California, September 10-12, 2013
D Y Harvey and M D Todd, “Automated Near-Optimal Feature Extraction Using Genetic Programming with Application to Structural Health Monitoring Problems”, 9th International Workshop on Structural Health Monitoring, Stanford, California, September 10-12, 2013
C M Haynes and M D Todd, “Effect of Applied Load on Guided Wave Monitoring of a Composite Bolted Joint”, 9th International Workshop on Structural Health Monitoring, Stanford, California, September 10-12, 2013
L Robinson and M D Todd, “Improved Sensitivity of Condition Monitoring Features via Holder Exponent Analysis”, 9th International Workshop on Structural Health Monitoring, Stanford, California, September 10-12, 2013
Z. Mao and M. D. Todd, “Bayesian Updating of Detection Capability with Frequency Response Function Related Structural Health Monitoring Features*,* ”* *9th International Workshop on Structural Health Monitoring, Stanford,California, September 10-12, 2013.
S. Taylor, E. Raby, G. Park, K. Farinholt, and M. D. Todd, “Wireless ActiveSensing Platform for Structural Infrastructure Monitoring*,*”* *9th International Workshop on Structural Health Monitoring, Stanford, California, September 10-12, 2013.
S Ouellette and M D Todd, “A Systematic Approach to Corrosion-Powered Sensor Network Design,” 2013 ASME Conference on Smart Materials, Adaptive Structures, and Intelligent Systems, Snowbird, Utah, September 16-18, 2013
M D Todd, “A Bayesian Experimental Design Approach to Structural Health Monitoring,” 2013 ASME Conference on Smart Materials, Adaptive Structures, and Intelligent Systems, Snowbird, Utah, September 16-18, 2013 (invited keynote speaker)
G. Jarmer, E. Flynn, M. D. Todd, and J. R. Lee, “In-Situ Dispersion Curve Estimation and Optimal Defect Detection Using Ultrasonic Phased Arrays,” Asia-Pacific International Symposium on Aerospace Technology, Takamatsu, Japan, November 20-22, 2013.